Citaat uit de Handleiding voor Manual_VP2_Console
Powering the Console
Cabled Vantage Pro2 Stations
Cabled Vantage Pro2 consoles supply power to the sensor suite through the
console cable. Because of the added power consumption of the sensor suite, the
cabled console requires an AC power adapter used as the main power supply. The
console batteries provide backup power for up to four to six weeks.
Wireless Vantage Pro2 Stations
Wireless Vantage Pro2 consoles do not require the use of an AC adapter. You
may use the included adapter if you wish, but the three C-cell batteries should
power a wireless console for up to nine months.
Note: When using an AC Power adapter, be sure to use the power adapter supplied with
your Vantage Pro2 Console. Your console may be damaged by connecting the
wrong power adapter. The console does not recharge the batteries. Because of
this, and because NiCad batteries do not power the console as long as alkaline
batteries, use alkaline batteries in the console.
Dat bedoelde ik dus juist met mijn vorige reactie:
- het
lijkt dat de
interne sensoren van de Console primair werken zolang de batterijen in de Console in goede conditie zijn,
ongeacht of er een netvoeding is aangesloten.
'Systeem-denkend' zou je eigenlijk het omgekeerde verwachten als opzet met beste robuustheid en beste voedingsstabiliteit:
- netvoeding = 100% functionaliteit
- batterijen = backup voor overbrugging powerdip
Hoe dan ook, zorg dat de alkaline-batterijen van je Console in goede conditie zijn,
en
verwissel de batterijen
terwijl de netvoeding aangesloten blijft (want dan blijft
mogelijk het geheugen overeind met de instellingen & verzamelde sensorwaarden).