beneluxmeteo schrijft:
wsp schreef:
Dus mijn vraag wat wil je precies gaan ontvangen?
Ik ontvang eigenlijk al een paar jaar data via Eumetcast. Ik ben alleen m'n recv-channels.ini file kwijtgeraakt doordat mijn externe harddisk is gecrashed..
Ik ben voor alle data geregistreerd, maar wat mij opvalt is dat ik bijv. DWDSAT niet ontvang, ondanks dat het wel in het recv-channels.ini bestand staat, en ook de pid's etc. kloppen.
Dus als jij een goed werkend recv-channels.ini file hebt dan kun jij mijn dag enorm goedmaken :silly:
Groet,
Johan
Hallo Johan,
Het probleem is dat voor elk ieder die file persoonlijk is, niet geheim, maar elk iemand heeft er iets anders in staan, zo werk ik met Ramdisk en is mijn file weer anders dan bijiemand anders.
Je mag die van mij hebben, of je er wat aan hebt is maar de vraag, op google vindt je inderdaad hele goede voorbeelden van deze file en dat zijn standaard voorbeelden die normaal gewoon werken.
Terug te komen op DWD heb je deze ook laten registreren bij DWD?
Op het moment dat je die laat registreren, dan krijg je ookj pas de data van DWD via de Eumetcast, anders niet, dit wordt namelijk aan jouw account toegegvoegd.
Heb je niet geregistreerd, dan kun je hem wel in de recv ini zetten, maar je krijgt hem dus niet, moet gekoppeld zijn aan jouw account.
Er is laats wel een registreer ronde geweest, daar moest een ieder die een dongel heeft zich helemaal opnieuw registreren, dan wel als bestaande, zodat je ook weer alle data kreeg, als je dit ook niet gedaan hebt is het ook mogelijk de reden waarom je niet alle data ontvangt.
Een ding is fijn, je bent dus al een gebruiker van Eumetcast en is het gemakkelijker voor je omdat je er mee bekend bent.
Hier de file zo als ik hem gebruikt en dus ook een data traffic van 60 Gig per dag is.
Zoals je ziet gebruik ik ook de RSS feed, deze worden om de 5 minuten geupdated, de rest om 15 minuten en sommige ook om het uur.
Ik hoop dat je er wat aan hebt en anders eens in de gebruikersgroep van David Taylor op het Yahoo gebeuren genaamd MSG-1 wel alles Engels talig.
Let op de directories, die zul je allemaal moeten veranderen, dat is daar waar Tellicast de data in zet en die jij weer kunt gebruiken om beeld te krijgen.
# recv-channels.ini - TelliCast+TelliVision Client channel configuration file
#
# 2-4-3 10-10-2005
#
[EUMETSAT Data Channel 1]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 2]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 3]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 4]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 5]
target_directory=C:\\Eumetcast RSS
[EUMETSAT Data Channel 6]
target_directory=C:\\Eumetcast RSS
[EUMETSAT Data Channel 7]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 8]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 9]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 10]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 11]
target_directory=c:\\Eumetcast
[EUMETSAT Data Channel 12]
target_directory=c:\\Eumetcast
[DWDSAT]
target_directory=c:\\Eumetcast DWD
[Americas-CH1]
target_directory=c:\\Eumetcast Americas
[SAF-Europe]
target_directory=c:\\Eumetcast
[SAF-Americas]
target_directory=c:\\Eumetcast
[SAF-Africa]
target_directory=c:\\Eumetcast
[Info-Channel-1]
target_directory=c:\\Eumetcast
[Info-Channel-2]
target_directory=c:\\Eumetcast
[EPS-1]
target_directory=c:\\Eumetcast
[EPS-2]
target_directory=c:\\Eumetcast
[EPS-3]
target_directory=c:\\Eumetcast
[EPS-4]
target_directory=c:\\Eumetcast
[EPS-5]
target_directory=c:\\Eumetcast
[EPS-6]
target_directory=c:\\Eumetcast
[EPS-7]
target_directory=c:\\Eumetcast
[EPS-8]
target_directory=c:\\Eumetcast
[EPS-9]
target_directory=c:\\Eumetcast
[EPS-10]
target_directory=c:\\Eumetcast
[EPS-11]
target_directory=c:\\Eumetcast
[EPS-12]
target_directory=c:\\Eumetcast
[EPS-13]
target_directory=c:\\Eumetcast
[EPS-14]
target_directory=c:\\Eumetcast
[EPS-15]
target_directory=c:\\Eumetcast
[EPS-16]
target_directory=c:\\Eumetcast
[EPS-17]
target_directory=c:\\Eumetcast
[EPS-18]
target_directory=c:\\Eumetcast
[EPS-19]
target_directory=c:\\Eumetcast
# target_directory: Directory for received files. The target_directory name
# is relative to the current working directory.
# syntax: target_directory=
# [*] stond boven default: received
tmp_directory=receiving/tmp/files
# tmp_directory: If this parameter is given tc-recv will internally
# store/compose all received files within the given directory and
# later move them to the target directory.
# While this option requires an additional move operation it
# guarantees that all files appearing in the target directory are
# fully written to the file system.
# syntax: tmp_directory=
# default: undefined=off, but default value may be redefined in
# recv.ini
# Section per channel or channel group identified by channel name (wildcard
# "*" allowed at end of name)
#activate_ftp_forwarding=1
# activate_ftp_forwarding: Will activate FTP forwarding for the correctly
# received files according to the recv.ini [ftp_forwarding]
# parameters.
# syntax: activate_ftp_forwarding=
# range: 0/1
# default: 0=off
#tmp_directory=receiving/tmp/files
# tmp_directory: If this parameter is given tc-recv will internally
# store/compose all received files within the given directory and
# later move them to the target directory.
# While this option requires an additional move operation it
# guarantees that all files appearing in the target directory are
# fully written to the file system.
# syntax: tmp_directory=
# default: undefined=off, but default value may be redefined in
# recv.ini
#tmp_prefix=.
# tmp_prefix: Like tmp_directory, but files are composed within the final
# target directories but stored with the given prefix in front of
# the normal filenames until the files are fully written.
# syntax: tmp_prefix=
# default: undefined=off, but default value may be redefined in
# recv.ini
#tmp_suffix=.tmp
# tmp_suffix: Like tmp_prefix, but adding a suffix to the normal filenames
# until the files are fully written.
# syntax: tmp_suffix=
# default: undefined=off, but default value may be redefined in
# recv.ini